4th Gen Tacoma (2024+) Tacoma and (2024+) Landcruiser Leveling and lift kits
In 2023, when Toyota released the information on the next generation of Tacoma, we knew we had to get back into this market. The new generation of Tacoma has a suspension configuration nearly identical to the 4Runner that we have had such great success making lift kits.
Most of the fitment also appears to fit the 2024 Landcruiser variation the same, if you're interested in a free kit in exchange for confirming test fit, reach out to us.
If you have questions for us, please reach out during normal business hours at 757-303-8286 or via email at CornfedSuspension@gmail.com
4th Gen (2024-2025) Toyota Tacoma Front Topout Shims $29-49
This kit is a front only kit. This kit is the easiest of the installs as it doesn't require compressing the strut assembly for installation.
This kit is perfect for slight modifications to trim or equalize the front and rear.
We have also confirmed fitment of this part for use on the 2024-2025 Landcruiser SUV as well.
These shims are available in 2 sizes. The smaller size is a pair of 1/4" thick zinc plated steel lift shims to provide 1/2" of front lift. The larger size is a pair of 3/8" thick zinc plated steel lift shims to provide 3/4" of front lift. (These should be ready to ship by approximately 10-7-24).
4th Gen Tacoma Front 1.5" Strut Preload Spacer $49
This kit can be run either as a standalone for 1.5" of front lift or combined with the topout shims for a total of 2" or 2-1/4" of front lift.
These lift spacers are machined from HDPE, a high density polethylene plastic.
This kit requires compressing and disassembling of the strut for installation. These preload spacers fit the same on both the TRD Offroad (Red Bilsteins) and on the TRD Sport or SR5 configurations (Black Hitachi's)
4th Gen Tacoma Kits $119-139
These kits provide front lift with a Preload spacer alone as 1.5" of front lift or a combination of the preload spacer and a small topout shim for a total of 2" front lift.
These kits then match this front lift with a 1/2" or 1" rear spacer to balance the stance of the truck.
This kit requires compressing the front struts for installation, but because of the minimalist lift size, the install is super easy.
4th Gen Tacoma full kit install video
1.5" Tacoma front lift 4GTacoBLK-15SPR $39
For an ideal minimalist lift on your SR, SR5, or TRD Sport configuration Tacoma equipped with the Black Hitachi struts this kit will level out your truck without the need for additional rear lift.
Out incredibly functional design of a strut preload ring gives great value with an even better price on these high quality zinc plated steel parts.
This kit requires compressing the strut for installation, but because of the minimalist lift size, the install is super easy.
Tacoma BLK Strut Preload Rings install video
4th Gen Tacoma Rear lifts $69-79
4th Gen Tacoma D-Ring mounts $99
These D-Ring mounting points add a towing point for the front or the rear. These mounts are machined from 1018 Cold Rolled steel and bolt securely onto the frame using the factory threaded mounting point.
These fit the TRD Sport and SR5 models best if the lower air dam has been removed.
These are sold as a matched pair of D-ring mounts. The initial batch will be powdercoated satin black, but we plan to offer bright red, and silver zinc plating as well with future batches.
These do include the Class 10.9 mounting bolts, but DO NOT include the D-Rings.