4th Gen Tacoma (2024+) Tacoma front level and full lift kits.

In 2023, when Toyota released the information on the next generation of Tacoma, we knew we had to get back into this market. The new generation of Tacoma has a suspension configuration nearly identical to the 4Runner that we have had such great success making lift kits. These kits are the continuing development of some of our highly successful configurations for the 4Runner and Tundra market and now we have them ready for the Tacoma as well. If you have questions for us, please reach out during normal business hours at 757-303-8286 or via email at CornfedSuspension@gmail.com
Front only topout shims $39-49
This kit is a front only kit. This kit is the easiest of the installs as it doesn't require compressing the strut assembly for installation. This kit is perfect for slight modifications to trim or equalize front and rear. We have also confirmed that this fitment will also work on the 2024 Landcruiser SUV as well. These shims are available in 2 sizes. The smaller size is a pair of 1/4" thick zinc plated steel lift shims to provide 1/2" of front lift. The larger size, a 3/8" thick zinc plated steel shim to provide 3/4" of front lift, it will be released within the next couple weeks.
4th Gen Tacoma Red Bilstein Strut Preload Ring lift kits
$59-169
These kits are similar to our time tested strut preload ring kits for the 2nd and 3rd Gen Tundra Bilstein configuration. We added a replacement shock body bumpstop pad to retain full functionality of the factory strut configuration after lifted.
These allow lift heights from a 1.5" front only, up through a 2.5" front and 1" rear for maximum clearance.
Tacoma RB Strut Preload Rings install video
4th Gen Tacoma Kits $119-159
These kits provide front lift with a Preload spacer alone as 1.5" of front lift, or a Preload spacer combined with a small topout shim for a total lift of 2" front lift. These kits then match this front lift with a 1" rear spacer to balance the stance of the truck. This kit requires compressing the front struts for installation, but because of minimalist lift size, the install is super easy.
4th Gen Tacoma Black Hitachi Strut Preload Rings and kits $49-169
For an ideal minimalist lift for your SR, SR5 or TRD Sport configuration Tacoma equipped with the Black struts this kit will give a few stance options for your truck. These kits come in several size options, from the smallest, a 1.5" Front only Strut Preload ring. The next size option provides a 1.5" front Strut preload ring and a 1" rear lift spacer to add height for the rear as well. Lastly is our largest size option for the black strut combination, this kit includes a 1.5" Strut Preload ring and then a topout shim to take the front lift up to 2" total front lift and a set of 1" rear spacers to match the stance in the rear.
This kit requires compressing the front struts for installation, but because of minimalist lift size, the install is super easy. Tacoma BLK Strut Preload Rings install video
4th Gen Tacoma 1.5" UHMW Preload lift $49
This kit can be run either as a standalone for 1.5" of front lift or combined with the topout shims for a total lift of 2" or 2-1/4" of front lift.
These lift spacers are machined from HDPE, a high density polyethelene plastic.
This kit requires compressing and disassembling of the strut for installation. These Preload spacers fit the same on both the TRD Offroad (Red Bilsteins) and on the TRD Sport or SR5 configurations (Black Hitachi's).
Tacoma UHMW Preload install video
4th Gen Tacoma 1" Rear lift spacers $89
These rear lift spacers are sold as a matched pair for lifting the rear of the 4th Gen Tacomas to balance the stance of the truck with a 1-1/2" or larger front lift.

These are currently available in 1" rear lift size.




Rear lift install video


Copyright © 2020 Register.com. All Rights Reserved.